osha electric safety work related safety term

Essay Topics: April 2012,
Category: Federal government,
Words: 871 | Published: 03.05.20 | Views: 381 | Download now


Get essay

Electricity, Safety, Flames Safety, Office Safety

Research from Term Paper:

Adoption of the practice will ensure that unintended energization of power lines from back feed electrical power from electrical generator. Hence this will help in protecting utility range workers by possible electrocution. The power generators need to be switch off and allow these to cool just before refuelling. (Occupation Safety and Health Administration, n. deb. )

(ii) Power lines: Safety evaluate are required to always be adopted by overhead and underground electric power lines as they carry extremely high voltage current. Fatal electrocution is the main approaching risk since also melts away and declines. The safety precautions that are necessary to be taken happen to be (a) Expense and subway power line indicators have to be looked. (b) it is important that 1 stays 15 feet at least from over head power lines and ignore that they are energised. (c) Lines need to be de-energised and grounded when people are working in close proximity. (d) While operating near electrical power lines, use of nonconductive wooden or fibreglass ladders have to be used. (Occupation Safety and Health Operations, n. g. )

(iii) Extension Cords: Usage from routine uses may render the cords to get loose and expose these people. Cords which can be not of 3-wire types and are certainly not suitable for rigorous use, or which have been modified raise the likelihood of contacting electric powered current. It is crucial to adhere to the following (a) Make use of equipment containing received an approval of aligning with OSHA norms. (b) Cords really should not be altered or used all of them in an wrong manner (c) Cords which can be factory assembled must only be employed as likewise extension cords which have been 3-wire type. (d) Cords, connection products and appropriate which are capable of pressure relief needs to be used only. (e) Care must be taken up remove receptacles by drawing on the ear canal not the cords. (Occupation Safety and Health Government, n. m. )

(iv) Equipment: Due to rough characteristics of building work, schedule use of power equipment makes normal wear and tear. This triggers drop-outs in insulation, short-circuits, and also ends in exposed wires. Absence of ground-fault protection can trigger a ground wrong doing transmitting current through the body of the member of staff. The following safety precautions need to be undertaken (a) Use of Ground-Fault Outlet Interrupters – GCFI in each and every 120-volt, single-phase, 15 and 20 ampere receptacles. Alternative using Guaranteed Equipment Grounding Conductor Software – AEGCP will also be beneficial. (b) Usage of two-core protected tools and equipment which can be distinctively designated (c) it is important to have a image inspection of all electrical tools prior to make use of and looking for any equipment with damaged wires, missing floor prongs, damaged tool casings etc . (Occupation Safety and Health Government, n. m. )

(v) Electrical incidents: In cases where the ability supply towards the electrical tools has not been grounded, or the course has been dropped out, fault current may possibly pass over the worker’s physique giving electric powered burns or perhaps loss of existence. Even if the electricity system is sufficiently grounded, electric equipment can easily immediately change from safe to unsafe due to severe conditions and improper controlling. The following safety measures need to be used (a) Undertaking of a aesthetic inspection ahead of use and remove virtually any defective products from being used (b) it is necessary to ensure that most power devices, electrical circuits and power equipments will be grounded. (c) Regular inspection of electric systems to ensure that the way to the ground is usually continuous. (d) Ground prongs should not be taken out of cord and plug connected apparatus since also extension cords. (e) Usage of double-insulated equipment is important every exposed material parts of gear need to be grounded. (f) Staying away from standing in humid and wet regions with all the portable electricity tools. (Occupation Safety and Health Supervision, n. d. )


American Pipeline Contractors Affiliation. (n. g. ) “Tool Box Security Topic”

Gathered 28 04, 2012 coming from http://www.americanpipeline.org/ToolBox/English/ElectricalSafety.pdf

Chao, Elaine T; Henshaw, Ruben L. (2002) “Controlling Power Hazards”- OSHA”

Retrieved twenty-eight April, 2012 from http://www.osha.gov/Publications/osha3075.pdf

Electricity Discussion board. (2012) “OSHA Electricity Safety” Retrieved twenty-eight April, 2012 from http://www.electricityforum.com/forums/osha-electrical-safety.html

Occupation Protection and Well being Administration. “(n. d. ) OSHA News sheet. “

Recovered 28 Apr, 2012 by http://www.osha.gov/OshDoc/data_Hurricane_Facts/elect_safety.pdf

Usa Department of Labor. (2012) “OSHA News sheet: Working Properly with Electricity” Retrieved twenty eight April, 2012 from http://www.osha.gov/SLTC/electrical/index.html

United States Division of Labor. (2012) “U. S. Section of Labor Assistant Admin for Work-related Safety and Health Buenos aires D. C. 20210 OSHA Instruction STD1-16. 7 Jul 1, 1991 Directorate of Compliance Programs”

Retrieved 28

< Prev post Next post >